|
60,00 EUR incl. 19% BTW |
|||
)
A-160 Clock/Trigger Divider
Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface.
At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64.
The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.
The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events.
Similar modules:
A-152 Voltage Addressed Track&Hold / Switch (Multiplexer) / Digital Outputs
A-161 Clock/Trigger Sequencer
--------------------------------------------------------------------------------
Breite/Width: 4TE/4HP, Strombedarf/Current: 40 mA
--------------------------------------------------------------------------------