Mijn winkelwagen:

0 item(s) - € 0,00
Uw winkelwagen bevat geen artikelen.

0

Welkom bij Doepfer.nl

Meer Views

Doepfer A-185-2

Beschikbaarheid: niet op voorraad

€ 70,00

Snel Overzicht

Precision adder/Bus Access

Details

Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of VCOs (e.g. from keyboard + sequencer 1 + sequencer 2).

The module is equipped with four CV inputs: one with attenuator and three without attenuator. Each input is normalled to +1.00V (i.e. if no plug is inserted the input contributes 1.00V to the sum appearing at the output). The input with attenuator can be used for common modulations (e.g. from an LFO, ADSR, Theremin, Pitch-Bender) for all VCOs connected to the output. The inputs without attenuators are planned to add control voltages coming out of keyboards, sequencers, Midi-to-CV interfaces, ribbon controllers or other CV sources that follow the 1V/oct standard. For example the CV of a keyboard can be used to transpose the CV coming from a sequencer, or the CV of a slow sequencer can be used to transpose the CV from a fast sequencer.

Each input is equipped with a three-position switch that determines if the corresponding voltage is added (right position), subtracted (left position) or if the input has no effect (center position). If no plug is inserted the corresponding switch works as an octave switch as the default 1.00V are added or subtracted to the output voltage according to the switch position.

The module is equipped with 4 outputs: three non-invertíng and one inverting ouput. An internal jumper can be used to connect the non-inverted or inverted output to the CV line of the A-100 bus. That way the module can used to control several VCOs that are connected to the same bus board as the A-185-2 (same functionality as A-185-1). Attention: in this case the connections of other CV sources (e.g. A-185 or A-190) to the A-100 bus have to be removed. Otherwise a short circuit is made !


-------------------------------------------------------------------------------- 
Breite/Width: 6 TE / 6 HP / 30.0 mm
Tiefe/Depth: 50 mm (measured from the rear side of the front panel)
Strombedarf/Current: 10 mA 
--------------------------------------------------------------------------------

Aanvullende Informatie

Merken Doepfer

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.

copyright by the-Music-House.com