115,00 EUR

incl. 19% BTW
Aantal:   St

MCV4 is a budget-priced MIDI-to-CV-Interface to control vintage monophonic synthesizers via MIDI. MCV4 is provided with 4 analog control voltage outputs (CV1...4) and one Gate/Trigger output.

These are the most important MCV4 features:

  • 4 analog control voltages CV1...CV4
  • voltage range for CV1...4: 0...+5V, 8 Bit resolution (equivalent to 1/4 semitone resolution)
  • CV1 for pitch control (normally VCO CV)
  • CV2...4 for voltage control of other functions (e.g. VCF frequency, loudness, modulation)
  • MIDI control of CV1..4:
  • * CV1: note on/off with pitch-bend, 1V/octave characteristic
  • * CV2 monophic after-touch
  • * CV3 velocity and/or volumen (controller #7)
  • * CV4 velocity and/or any controller (setting of the controller number via learn button)
  • pitch-bend is used for CV1 generation with 1/4 semitone resolution
  • gate output type can be selected via jumper inside the device between voltage trigger (+5V or power supply voltage) and S-trigger (switched trigger)
  • MIDI channel and reference note for CV1=0V adjustable via learn button
  • different assign modes for CV1 (highest note, last note, reference note)
  • retrigger on/off while playing legato
  • gate/trigger polarity normal/inverted
  • two 1/4" stereo jack sockets for CV1/2 and CV3/4
  • 1/4" mono jack socket for gate/trigger
  • learn button with LED for adjusting MIDI channel, reference note for CV1, controller for CV4
  • optical display of gate/trigger via LED
  • MIDI-In, MIDI-Thru
  • non-volatile memory for parameter settings
  • stable silver-grey metal case (about 95x75x35 mm, 1mm sheet steel)
  • external AC adapter for power supply (AC adapter for 230V AC and European type of mains connector is included within Europe, adapters for other voltages or other mains connector types has to be purchased by the customer in his country, 7...12V/100mA DC required, please ask the representative in your country)